Products Archive - Seite 5 von 6

Low power dissipation and high performance SBC

Low power dissipation and high performance SBC

Based on the NXP® QorIQ® Power Architecture

6U VMEbus CPU Board, 2eSST VME-Bus interfaceature
Conforms to VMEbus specification ANSI/IEEE STD1014-1987- and ANSI/VITA 1-1994eature
QorIQ® NXP® P2020 dual core CPU, up to 1.33 GHz core speed
Up to 2 GB DDR2-soldered ECC RAM and up to 512 MB NAND Flash memory

Power Architecture NXP® QorIQ®-PowerPC

6U VMEbus CPU Board, 2eSST VME-Bus interfaceature
Conforms to VMEbus specification ANSI/IEEE STD1014-1987- and ANSI/VITA 1-1994eature
NXP® QorIQ® single core P1013 or P1022 dual core CPU, up to 1.0 GHz core speed
Up to 2 GB DDR2-soldered ECC RAM and up to 512 MB NAND Flash memory

System on Module based on NXP® QorIQ® T1042 CPU

System on Module based on NXP® QorIQ® T1024 CPU

System on Module based on NXP® QorIQ® P2041 CPU

up to 4 GB DDR3 memory, 64-bit with EEC, soldered
10x @ 5 GHz SerDes lanes offer a completely new performance range for demanding I/O functions
two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
High precision RTC
Power: 3.3 V DC single supply, 24 A core voltage regulator

System on Module based on NXP® QorIQ® P2020 CPU

up to 2 GB DDR2 memory, soldered, optional: with EEC
up to four SerDes up to 3.125 GHz multiplexed across controllers
two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
High precision RTC
Scaling from a single core at 533 MHz (P1011) to a dual core at 1.2 GHz (P2020)

System on Module based on NXP® QorIQ® P1022 CPU

up to 2 GB soldered DDR2 memory
up to five SerDes up to 3.125 GHz multiplexed across controllers
two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
I²S interface with maximum sampling frequency of 192 kHz
LCD interface supporting a display of 1280 x 1024P @ 60 MHz, 24 bits per pixel

System on Module based on NXP® QorIQ® P1013 CPU

up to 1 GB soldered DDR2 memory
up to five SerDes up to 3.125 GHz multiplexed across controllers
two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
I²S interface with maximum sampling frequency of 192 kHz
LCD interface supporting a display of 1280 x 1024P @ 60 MHz, 24 bits per pixel