Power Architecture

System on Module based on NXP® QorIQ® T1042 CPU

• up to 8 GB 64-bit DDR4 ECC RAM at 1600 MTps
• up to 8x SerDes lanes at 5 Gbps, configurable in different options
• hybrid 32-bit mode to support legacy software
• temperature sensor
• All on board supply voltages are monitored by a separate µ-controller

System on Module based on NXP® QorIQ® T1024 CPU

• up to 8 GB 64-bit DDR4 ECC RAM at 1600 MTps
• up to 4x SerDes lanes at 10 Gbps, configurable in different options
• hybrid 32-bit mode to support legacy software
• temperature sensor
• All on board supply voltages are monitored by a separate µ-controller

System on Module based on NXP® QorIQ® P2041 CPU

• up to 4 GB DDR3 memory, 64-bit with EEC, soldered
• 10x @ 5 GHz SerDes lanes offer a completely new performance range for demanding I/O functions
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
• High precision RTC
• Power: 3.3 V DC single supply, 24 A core voltage regulator

System on Module based on NXP® QorIQ® P2020 CPU

• up to 2 GB DDR2 memory, soldered, optional: with EEC
• up to four SerDes up to 3.125 GHz multiplexed across controllers
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
• High precision RTC
• Scaling from a single core at 533 MHz (P1011) to a dual core at 1.2 GHz (P2020)

System on Module based on NXP® QorIQ® P1022 CPU

• up to 2 GB soldered DDR2 memory
• up to five SerDes up to 3.125 GHz multiplexed across controllers
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
• I²S interface with maximum sampling frequency of 192 kHz
• LCD interface supporting a display of 1280 x 1024P @ 60 MHz, 24 bits per pixel

System on Module based on NXP® QorIQ® P1013 CPU

• up to 1 GB soldered DDR2 memory
• up to five SerDes up to 3.125 GHz multiplexed across controllers
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
• I²S interface with maximum sampling frequency of 192 kHz
• LCD interface supporting a display of 1280 x 1024P @ 60 MHz, 24 bits per pixel

System on Module based on NXP® QorIQ® P1011 CPU

• up to 1 GB soldered DDR2 memory
• up to for SerDes up to 3.125 GHz multiplexed across controllers
• two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
• High performance, low power, single core CPU
• The P1011 processor provides single core solutions for the 533 MHz to 800 MHz performance range