System on Modules
Power Architecture - QorIQ
Power Architecture - QorIQ

miriac™ MPX2020

System on Module based on NXP QorIQ P2020 CPU

miriac™ MPX2020
The miriac™ MPX2020 CPU Module is the first of a series of QorIQ™ based products. The P2020 combines dual PowerArchitecture™ e500v2 processor cores with system logic required for networking, wireless infrastructure and telecommunications applications.
●  up to 2 GByte DDR2 memory, soldered, optional: with EEC
●  up to four SerDes up to 3.125 GHz multiplexed across controllers
●  two 208 Pin Zero Force Connectors, that make all I/O and bus signals available to the carrier board
●  High precision RTC
●  Scaling from a single core at 533 MHz (P1011) to a dual core at 1.2 GHz (P2020), the two QorIQ platforms together deliver an impressive 4.5 x aggregate fre-quency range within the same pinout.
FormfactorMPX-1, 77mm x 66 mm
ArchitecturePowerPC
CoresNXP QorIQ P2020, 2x e500v2 core @1.0 or 1.2GHz, 32kB L1 and 512kB L2 caches
System Memoryup to 2GByte DDR2 memory, soldered, optional: with EEC
Flashup to 512MB NAND Flash
SPI-Flashup to 4MB SPI Flash (boot option)
Ethernet3x 10/100/1000 Mbps Ethernet controllers (eTSECs) with IEEE® 1588 support
USB 2.01x USB 2.0
SerDes lanesup to four SerDes up to 3.125 GHz multiplexed across controllers, e.g.
- 3x PCI Express
- 2x SRIO or
- 2x SGMII
other I/O Interfaces1x I2C
2x UART
timer
SPI
GPIO
LBC local bus
Flash CARD1x SD
Software SupportLinux
Microware OS-9
VxWorks
MicroC/OS-II
QNX
others are avialable on request
Temperatureoptional: ext. temp.
No.TitleDescriptionStatus
837605miriac MPX2020 System on Module, ext. temp. versionmiriac MPX2020 SoM, P2020@1,0GHz, 2GB ECC RAM, 256MB Flash memory, ext. Temp.build on order
837612miriac MPX2020 System on Module P2020@ 1,2 GHz, 2 GB DDR2 ECC & 256 MB Flash memoryavailable
839610miriac SBC2020 Development Kitmiriac SBC2020 development kit, incl. order #: 839601, Linux BSP, accessoriesbuild on order

Datasheets, Manuals etc.

Datasheet